The most annoying part about painting is when your paint sprayer breaks down in the middle of a project. Unless you have access to an airless service, repairing it yourself can be difficult or time consuming- depending on what’s wrong with it! Sending away for repairs takes too long sometimes and there are plenty who would love having these jobs done locally instead so they don’t miss any deadlines.
The Graco Magnum is a popular choice with preppers due to
its high mobility, capacity and power. However, there are several common
problems that owners have reported with their Magnums over the years.
Before you read any further, I have recently reviewed some
of the best EMP blankets on the market. These things are seriously cool!
Now let’s take a look at the most common Graco Magnum
problems and how to fix them…
Noisy Operation
Graco magnum are probably the number 1 problem with the Graco Magnum. Upon first
receiving your unit, you might notice that it rattles quite loudly when running
the motor.
This is due to several nuts and bolts not being properly
tightened during assembly at the factory. Thankfully these are easy to fix by
simply tightening them up, so let’s move on to problem number two?
Graco Magnum Will Not Start or Stops Running
There are quite a few things that could be causing this
problem, so let’s look at them one by one.
One of the graco
magnum paint sprayers problems with these type
of air compressors is that they eat up spark plugs. If your unit stops working
in the middle of usage it could be the perfect time to upgrade your plug to a
more high-performance version.
Another common reason for the motor failing to start is a
lack of oil. The air compressor should have come with an oil bottle, so be sure
it’s filled up before you try restarting your unit.
If this doesn’t work, check on the power cord connection. This sounds simple but I have seen several people not tighten up their cord correctly and cause a no start condition.
https://ko-fi.com/Post/Am-I-The-Only-One--Aaron-Lewis-Lyrics-D1D1DNOQP
https://canvas.instructure.com/eportfolios/1254066/Home/Am_I_The_Only_One__Aaron_Lewis_Lyrics_
https://ibusinessday.com/am-i-the-only-one-aaron-lewis-lyrics-release-on-2nd-july-2021/
https://dev.to/rajazaini/am-i-the-only-one-aaron-lewis-lyrics-4eja
https://telegra.ph/Am-I-The-Only-One-Aaron-Lewis-Lyrics-07-06
https://webhitlist.com/profiles/blogs/am-i-the-only-one-aaron-lewis-lyrics-release-on-2nd-july-2021
https://wiliiamwillie.weebly.com/music/am-i-the-only-one-aaron-lewis-lyrics-release-on-2nd-july-2021
Very Slow Air Compressor
This is one of the most common graco magnum paint sprayers
problems and is usually related to an issue with the intake filter.
Check on the filter by removing it from its housing and
checking for any clogs or debris inside. When you put it back in, make sure
that both sides snap securely in place.
How do I Fix Graco Magnum Leaks?
Leaks are one of the more frustrating problems with the
Graco Magnum since they are not always easy to pinpoint. The most common leaks
are usually at the oil drain plug and supply hose fittings.
To fix the oil drain plug leak you will need to replace the
metal washer under the bolt head with a new one. If this doesn’t work, you
could also try replacing the entire plug .
The supply hose connections can also cause problems and
should be checked and tightened if needed. This replacement part looks to be a
good fit for your unit.
Graco Magnum is Getting Too Hot
Heat buildup is a common problem with the Graco Magnum and
can be caused by a few things. First, make sure you have a proper air intake
filter installed to keep dust and debris from building up in the mechanism. If
this doesn’t work, then the next thing to check is your oil level. An air
compressor that does not have enough oil will cause it to overheat and
eventually stop working altogether.
Finally, the exhaust tube can be a potential problem area
if there isn’t enough space to move freely. This can easily be fixed by adding
a flexible extension pipe between the unit and tube to increase air flow.
Spray Gun Spitting
Graco spray guns are known for spitting paint, but there
could be one or more reasons why yours is doing so. The first thing you need to
do when using any type of airless spraying system on your Graco Spray Gun (no
matter what size) is get into the habit of releasing pressure beyond where
you’re painting; this will help avoid droplets landing too heavily in certain
areas and leave less chance that they’ll show up as spots later down line
during finishing processes like cabinet/door production.
Primed Pump
Your Graco sprayer should have been primed too during set
up to remove any air from the pump and hose. Without priming, this can lead
spit because there is still trapped inside of it which causes Buying Spitting
Product Keys from Your Local Hardware Store for More Than You Worth.
Priming Agent
When your airless sprayer is giving you trouble, it can be frustrating. There are a few things that could potentially cause this problem and need to get fixed as soon possible! One of those problems includes excessive priming agent in the system which will make everything pressurized when turned on but not provide any flow or force behind whatever product its being used for – like painting furniture with latex paint thinned out over time before use (which isn’t ideal). Another issue may result if there has been flooding somewhere nearby since water might end up getting into one component along.